import usb
 
####################################
RQ_SET_LED    = 0
RQ_GET_SWITCH = 1
 
class BoardControl:
    def __init__(self):
        #print "Looking for MCU board..."
        dev = self.find_board()
        if not dev: raise "MCU board not found!"
        #print "MCU board found"
        self.handle = dev.open()
 
    def find_board(self):
        board = None
        for bus in usb.busses():
            for dev in bus.devices:
                if dev.idVendor == 0x16c0 and dev.idProduct == 0x05dc:
                    return dev
        return None
 
    def set_led(self,pin,val):
        reqType = usb.TYPE_VENDOR | usb.RECIP_DEVICE | usb.ENDPOINT_OUT
        self.handle.controlMsg(reqType, RQ_SET_LED, None, value=val*256+pin)
 
    def get_switch(self):
        reqType = usb.TYPE_VENDOR | usb.RECIP_DEVICE | usb.ENDPOINT_IN
        buf = self.handle.controlMsg(reqType, RQ_GET_SWITCH, 1)
        return buf[0]
 
board = BoardControl()
204223-52/board_module.txt · Last modified: 2009/09/07 04:23 (external edit)
 
 
©2008 Another cool website by 80KV